Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
Silca - T-Ratchet + Torque Kit
No image available

Silca T-Ratchet + Ti-Torque Kit


0 Review

Designed as the ultimate road / trail side tool the Silca T-Ratchet + Ti-Torque Kit could be worth its weight in gold. Allowing for precise tightening off all the common bolts with real time torque readings.

T-Ratchet and T-Torque combine to form a powerful force for good. Roughly 70% of damage to high end carbon components such as Seatposts, Handlebars and Stems comes when making adjustments without using torque. The majority of adjustments made without torque occur on the road side or trail side! This makes sense, as you might set up your new ride or component at home using your shop torque tool, or a pre-set torque tool, but need to raise/lower you saddle, or adjust the tilt of your bars out on the road.. Too low of a torque and the component will slip which is both unsafe and can cause damage, too high a torque and you can permanently crush the component.

T-Ratchet and Ti-Torque solve this by providing a highly ergonomic tool with a torque measuring extender that provides real time feedback to the torque you are tightening to. Simply begin tightening the fastener while watching the scale on the Ti-Torque, it will SHOW YOU IN REAL TIME the Torque being applied!!

The T-Ratchet uses interchangeable magnetic components to convert from screwdriver to ratchet, to ratcheting T-Handle in Seconds, and the Ti-Torque is made from Titanium and Aluminum with Hard Steel contact surfaces allowing it to weight only 30 grams!

Supplied in a waxed canvas carry pouch (with reflective cross stitching and magnetic closure.

Select Colour
Item added to bag Checkout Now

Tech spec for the Silca - T-Ratchet + Ti Torque Kit

Multi-Configurable, Multi-Functional Mini Ratchet Tool Kit with 2-8Nm Torque Drive

Cold Forged 1/4" Bit Driver Ratchet

Magnetic Extensions that Convert to a T-Handle

Red Ti-Torque torque measuring extension plus a Stainless Steel 1/4" Extension

Includes S2 Steel Bits with Size Indication: 2, 2.5, 3, 4, 5, 6mm Hex T10, T20, T25 Torx® PH2 Philips

Waxed Canvas with Reflective Cross-Stitch Quilting

Magnetic Closures double as Keepers for Steel Hardware when opened.

Pack size when closed 12cm x 8cm x 3cm (That's shorter than an Ipnone 6, about the same width and 3 x the depth)

Castelli Cafe Delivery

On orders over £50 and on orders under £50 at our discretion your Castelli Cafe package will be delivered by Parcelforce on an Express 24 h service to your stated delivery address. It is your responsibility to have someone available to sign for goods. Goods will not be left unsigned for, if no one is available to sign for your goods, a card will be left (where possible) and your Castelli Cafe package will be left at your local post office. On some small items under £50 we may still post for free using a cheaper signed for service. We do reserve the right to charge postage and packaging fees on orders under £50 in value, this will be a flat charge of £5 and will show on the first page of the checkout pages.

DELIVERY Terms and Conditions


At Castelli Cafe we are happy to offer a full refund on any items returned to us within 30 days of receipt for any reason if the item is unused.

We also offer a full refund (at your request) for goods that prove to have a fault within 30 days of receipt even if this item has been used. Please note you can still request a replacement or repair this is at your discretion.

In addition we offer a full 2 year warranty against manufacturing defects from date of purchase. We will repair, exchange or refund you, for manufacturing or material faults at our discretion in line with fair wear and tear.

RETURNS Terms and Conditions

Please refer to our full T&Cs for more details on purchasing, delivery, returns and your rights as a consumer.